Rogue Forty All     Mountain/Enduro     140mm Front/140mm Rear 

          One bike that can do it all? A quiver killer? Rogue Forty is your answer. Built to climb with ease and descend with confidence, the all-new Rogue Forty featuring Ellsworth’s ACTIVE Energy Efficient Suspension can take you anywhere.

          We designed the Rogue Forty with 140mm of front and rear travel to ensure control and comfort for all-day adventures in the mountains. The 67° head tube angle makes it stable for aggressive descending, yet the ultra-short 420mm chainstays keep the handling nimble when you need to whip through tight turns or steep g-outs. The Rogue Forty is also a born climber thanks in part to the 75° seat tube angle. It helps place your center of gravity for better traction and control on steep grades. And no matter up or down, the ACTIVE suspension provides ultimate traction, control, and the legendary Ellsworth pedalling efficiency.   

          We employed key design features on the Rogue Forty to simplify maintenance and to enhance the lateral and torsional stiffness of the suspension. To that end, it comes with  a Hex Taper Axle, a Hex Taper Rocker Locker, and suspension pivots with dual-row angular contact sealed cartridge bearings and wide-bore precision machined pivot pins. These three elements eliminate flex and create a rear suspension that tracks perfectly through the choppiest corners and allows efficient vertical travel, letting the suspension always perform at its best.

          Internal cable routing won’t distract from the sleek lines of the Rogue Forty, and internal sleeves ensure a rattle free ride. It’s Di2-ready with its own e-Den, a dedicated downtube storage area for the battery and junctions. This makes initial setup and maintenance an easy task.

 

Epiphany 27.5+/29     Cross-Country / Trail / Enduro     130mm Front / 120mm Rear     

        The Epiphany Convert is the transformer of the Ellsworth lineup. Want crazy traction and a more forgiving ride? Run it with the factory spec 27.5+ wheels and 3.0” tires. Have an XC race this weekend on a blistering fast course? Swap in some lightweight 29” race wheels and go hammer down. It’s almost two bikes in one, and this transformability comes without compromise.            

         The foundation of the carbon fiber Epiphany Convert frameset is the ACTIVE Energy Efficient Suspension. It’s a true four-bar linkage design that isolates pedal and braking forces from bump input. The result is a bike that pedals beautifully, yet soaks up the jarring impacts from the trail. Paired with the custom-tuned Fox DPS rear shock, ACTIVE delivers incredible traction and control throughout the 120mm of rear suspension travel. You’ll ride with more control and comfort, and you’ll get there faster and with less effort.          

        The Epiphany Convert employs a hassle-free, fully internal routing system to shield your hoses and cables from the elements, and a tapered head tube ensures strength and stability for your steering system. It takes a 34.9mm clamp-on front derailleur, a 30.9mm seatpost, a 73mm English threaded bottom bracket, and a Boost 12x148mm thru-axle rear hub.The frameset comes with a Cane Creek 1-1/8 - 1-1/2” semi-integrated headset and a Hex Taper 12x148mm rear thru-axle. It can be used with 27.5+ or 29” wheels. It is recommended for use with a 130mm front suspension fork.

The Ultimate Rider Experience.